item ca series miniature sized, high ripple current, long life high ripple current and long life product withstanding load life of 12000 hours(10000 hours for d=10) at +105 c. suited for ballast application. compliant to the rohs directive (2011/65/eu). aluminum electrolytic capacitors u 1 c 2 a 3 2 4 e 5 1 6 0 7 1 8 m 91011 capacitance tolerance (20%) rated capacitance (100f) rated voltage (250v) h d 12 t size code series name type d p 10 5.0 12.5 5.0 16 7.5 18 7.5 d 0.6 0.6 0.8 0.8 l + 1.5 m a x . 15 min 4 min radial lead type sleeve (p.e.t.) d pressure relief vent type numbering system (example : 250v 100 f) configuration d + 0.5max. p 0.5 d 10 pb-free leadwire pb-free pet sleeve pd 12.5 to 18 hd configuration (mm) dimension table in next page. please refer to page 20, 21, 22 about the formed or taped product spec. please refer to page 4 for the minimum order quantity. specifications category temperature range rated voltage range rated capacitance range capacitance tolerance leakage current tangent of loss angle (tan ) stability at low temperature endurance shelf life marking performance characteristics 25 to +105 c 160 to 450v 6.8 to 220f 20% at 120hz, 20 c after 1 minute's application of rated voltage, leakage current is not more than 0.04cv+100 (a) printed with white color letter on dark brown sleeve. after storing the capacitors under no load at 105 ? c for 1000 hours and then performing voltage treatment based on jis c 5101-4 clause 4.1 at 20 c, they shall meet the specified values for the endurance characteristics listed above. measurement frequency : 120hz capacitance change leakage current the specifications listed at right shall be met when the capacitors are restored to 20 c after d.c. bias plus rated ripple current is applied for 12000 hours (10000 hours for d=10) at 105 c , the peak voltage shall not exceed the rated voltage. tan within 20% of the initial capacitance value less than or equal to the initial specified value 200% or less than the initial specified value z 25 c / z+20 c rated voltage (v) impedance ratio zt / z20 (max.) 160 3 200 3 250 3 350 6 400 6 450 6 measurement frequency : 120hz at 20 c rated voltage (v) tan (max.) 160 0.15 200 0.15 250 0.15 400 0.20 450 0.20 350 0.20 ca cs smaller please refer to page 20 about the end seal configuration. long life pt cat.8100c
ca series aluminum electrolytic capacitors v 10 16 10 20 10 20 12.5 20 12.5 25 16 20 16 25 18 20 16 31.5 18 25 16 31.5 18 25 250 500 565 725 950 970 1280 1180 1360 1360 1400 1400 10 16 10 20 12.5 20 12.5 20 12.5 25 16 20 16 25 18 20 16 31.5 18 25 18 31.5 250 500 600 780 950 970 1280 1180 1360 1360 1700 10 20 12.5 20 12.5 20 12.5 25 16 20 16 25 18 20 16 31.5 18 25 18 31.5 300 600 630 720 750 1000 920 1400 1345 1500 10 16 10 20 12.5 20 16 20 16 25 18 20 16 31.5 18 25 220 280 350 600 700 750 1100 875 10 16 10 20 12.5 20 16 20 16 25 18 20 16 31.5 18 25 18 31.5 220 280 430 600 640 640 840 840 1000 10 20 12.5 20 16 25 18 20 16 31.5 18 25 18 31.5 150 320 560 560 700 700 900 2c 2d 2e 2v 2g 2w 160 200 250 350 400 450 case size d l (mm) : in this case, 6 will be put at 12th digit of type numbering system. frequency coefficient 50hz 0.40 120hz 0.50 1khz 0.80 10khz 0.90 100khz or more 1.00 dimensions frequency coefficient of rated ripple current cap. (f) code 6.8 10 22 33 47 68 100 150 220 6r8 100 220 330 470 680 101 151 221 : rated ripple current (marms) at 105 c 100khz cat.8100c
|
